
GENERAL INFORMATION
HARTFORD’s Pro Series Box Way BT40 Vertical Machining Centre is a compactly constructed power house that combines greater cutting capabilities with critical accuracy.
The machine is a high quality, high performance open fronted vertical machining centre with hardened & ground box guideways & geared headstock options.
- Full splash guard
- Cooling system
- Automatic lubrication system
- Work lamp
- Air blast through spindle
- Leveling bolts and blocks
- Convention heat exchanger in control box
- Automatic power off
- Operation finish lamp
- Operation manual and electric drawing equipment
- Coolant jets around spindle
- Spindle air curtain
FEATURES
Fanuc OiMF Control System
– 32 bit 10.4” Colour TFT LCD Display
– Manual guide i
– Front mounted ATA flash memory card slot
– Part Program Storage 512KB (1280 metres)
– Embedded Ethernet connection
HARTFORD DUAL SCREEN
Hartford, Taiwan’s biggest Machining Centre manufacturer, has introduced the ground breaking dual screen interface. Available for Fanuc and Mitsubishi controllers. The touch screen interface puts all the key functions e.g. feedhold, coolant on/off etc…at your fingertips. The graphical workpiece calibration interface makes set up an absolute breeze. Saving you time and money.
It’s a game changer!
24 Tool Automatic Tool Changer
Standard is the swing arm type 24 tool automatic tool changer.
– Max. tool diameter is 75mm
– Max. tool length is 300mm
– Max. tool weight is 6kg
Swarf Management
– Chink link chip conveyor, includes swarf barrow
– Coolant chip flush
– Coolant Wash Gun
– Air Gun
Spindle Chiller
– A spindle oil chiller
Box Way Construction for PRO 1000
– Rigid wide stance column
– The head wraps around the column ways for extreme rigidly
Box Way Construction for PRO 1000
– 4-ways in Y axis increases flat surface contact area for extreme rigidity
– Table and saddle wrap around the box ways
– 600 mm Y axis travel
HARTFORD Built Spindle
– HARTFORD built BT 40 spindle
– 8,000 rpm
– 15kW Spindle Motor Rating (S3 25%)
– 11kW Spindle Motor Rating 30 mins
– 7.5kW Spindle Motor Rating continuous
OPTIONAL FEATURES
- Fully enclosed splash guard
- NC rotary table
- Coolant through spindle 20 bar
- Closed loop linear scale positioning system
- Front mounted screw type chip conveyor
- Coolant flushing device
- Handy coolant gun
- Air gun
- 90 degree angle heat (tool type)
Controller Upgrades
– Fanuc Function: AI, Contour Control– II, Preread ahead 200 Blocks;
– Fanuc Function: Data server,1 gig of memory
– NANO smoothing (Includes Contour control II)
– Fanuc Function: Memory, Card Editing
– Polar coordinate, command (J818)
Automatic Power Off
Spindle Upgrades
– 8,000 rpm 11kW – Without chiller, Belt drive
– 10,000 rpm 7.5kW – INCLUDING chiller, Belt drive
– 10,000 rpm 11kW – INCLUDING chiller, Belt drive
– 6,000 rpm 7.5kW – INCLUDING chiller, Gearbox drive
– 6,000 rpm 7.5kW – INCLUDING chiller, Gearbox drive
Spindle Chiller
– A spindle oil chiller
CHECK: some spindle upgrades include a chiller as standard
Through Spindle Coolant Upgrade
Coolant Through Spindle – Option 20 bar (280 PSI)